
H鋼管/不銹鋼拋丸清洗機
◆成品結構的 Product structure
機器大部分是由保養室、地下室氣力輸料機輥道與往來氣力輸料機輥道、拋丸器、彈丸反復系統的 ( 含提高自己機、分離出來器、縱橫交錯螺旋運動輸送帶器和供丸途徑 ) 、吹掃單位、布袋除塵、電器設備把控好等基本功能零配件組合而成。
This machine is mainly composed of clean room, indoor rollor conveyeer and in and out of rollor conveyeer, shot device, projectile circulation system (including hoist, separator, vertical and horizontal conveyor for spiral pipe) , purging institutions, dust removal, electrical control function components.
◆廠品設計原理 Product principle
為不斷放卷的高功能表不斷功課清除垃圾機,在清除垃圾操作過程中中由電力工程管控的可變氣門正時頻變頻調速的推送輥道將鋼設計件或熱軋不銹鋼板、不銹鋼板送進清除垃圾機室肚子里拋射區時,其渾身各面賺取存在八臺有所差異經緯度座向的拋丸器的超強聚集彈丸的遏制與振動,使其上的鈍化銹層及臟物急劇剝落,熱軋不銹鋼板表層層就賺取擁有一些變厚度的光滑整潔表層層。墜入熱軋不銹鋼板之前的彈丸與銹塵經收廢回旋推送達彈丸巡環機軟件系統的,在清除垃圾屋外中間輥道卸車鏜孔。清除垃圾操作過程中中,撒滑加起來的丸塵分層物經室體漏斗、縱橫交錯向回旋推送機匯聚一堂于增加機下處,再增加到儀器上方的離心轉移機里,離心轉移后的干凈彈丸墜入離心轉移機進料斗中,供拋丸巡環施用。拋丸清除垃圾中生產塵土,由抽瘋管送向清潔機軟件系統的,清潔治療后的凈氣尾氣排放標準出到空氣磅礴中;粒狀狀塵土,由抽瘋管送向清潔機軟件系統的,清潔治療后的凈氣尾氣排放標準出到空氣磅礴中,粒狀狀塵土入獄捉提取。
Continuous high function of feeding a continuous work cleaning machine, in the process of cleaning up from the electrical control can be variable frequency speed rollor conveyeer steel structure or steel, and will send into steel cleaning up machine room area, its trajectory in the whole face from each by eight different coordinates the location of the powerful dense is shot of the projectile attack and friction, make its oxidation rusty layer and dirt quickly fall off, steel surface roughness has certain the bright and clean for surface. Fall into steel above with rust dust the projectile recycling helical conveyer to projectile circulation system, the clear channel outdoor both sides in unloading workpieces. In the process of cleaning up, breaking down the Chambers blasting dust mixture, and vertical and horizontal funnel to screw conveyor are collected to hoist the lower, and then promoted to the upper part of the machine, after the separation in the separator pure projectile into separator, is shot in the hopper for recycling. Is shot from the dust, cleaning up by convulsions tube send to dust removal system, the purification processing of the net after gas emissions into the atmosphere; Granular dust by convulsions tube, send to dust removal system, the purification process after the net gas emissions into the atmosphere, the granular dust was caught and collected.
H工字鋼/鋁合金板拋丸清除機
◆ 護膚品特性 Product features
鋼板規格拋丸機廠家一種進行清理 H 鋼、形鋼、網架、剛板的多功效不銹鋼料拋丸預操作機器設備。拋丸器布局風格為多多層面,采用了優質拋丸器,拋噴出快速細密的彈丸束,懲治在原使程序鋁件的各級的位置來進行立體感的、全多方面的徹底清除,使鋁件各表皮上的銹跡層、焊渣、防氧化皮名詞解釋它污染迅猛剝落,賺取存在肯定粗燥度的晶亮表皮,挺高了漆面與不銹鋼料表皮的粘堅持問題導向,并挺高鋁件的抗困乏和抗結垢力,提升了鋁件內再線質量,增長其應用人類壽命。
Steel shot machine is a clear H steel, steel, rack, steel, the multi-function steel is shot pretreatment equipment. Peen-forming decorate a form for the multiple perspectives, choose the advanced efficient peen-forming is a dense, aerosol propellant high speed of the projectile, blow the original state in parts of stereo, full range of cleaning, to make the work on the surface of the corrosion layer, welding slag and oxide skin and other contaminants quickly fall off, get has certain roughness of surface is bright and clean, improve the paint film with steel surface adhesion, and improve the resistance of fatigue and corrosion resistance, and improve the quality of the inner and prolong the service life.
◆ 主要技術設備產品參數 Main technical parameters
|
機設備規格 Model |
機構 Unit |
Q698 |
Q6915 |
Q6920 |
|
有效的去除高度 Width |
mm |
1200 |
1500 |
2000 |
|
室體出料口長寬比 Dimension |
mm |
1200×400 |
1200×400 |
2000×400 |
|
清除工件表面高度 Length |
mm |
1200-6000 |
1200-12000 |
1200-12000 |
|
輥道輸料速率 Speed(無級可控硅調壓) |
m/min |
0.5-4 |
0.5-5 |
0.5-4 |
|
徹底清除厚鋼板板厚為 Thickness |
mm |
3-60 |
1.5-60 |
3-60 |
|
操作型鋼規格 Specifications |
|
≤20#<≤16# |
≤20#<≤16# |
≤20#<≤16# |
|
拋丸量 Shot peening quantity |
kg/min |
4×250 |
4×250 |
6×250 |
|
第一時間存入量 First input volume |
kg |
3000 |
4000 |
4500 |
|
滾刷(刮刀)優化尺寸 Width |
mm |
200 |
350 |
450 |
|
透風量 Air volume |
m3/h |
17560 |
19000 |
19550 |
|
外貌尺寸 Shape dimension |
mm |
12180×4250×7095 |
15200×5370×6797 |
30650×6850×7500 |
|
地表下述進一步 Depth under the ground |
mm |
1616 |
2257 |
2800 |
|
總工作電壓(含有凈化)Total power |
kw |
78.3 |
113.5 |
156.6 |
|
機械設備總重 Total weight |
t |
20.4 |
33 |
41 |
|
機子款式 Model |
機構 Unit |
Q6925 |
Q6930 |
Q6940 |
|
有效的請理間距 Width |
mm |
2500 |
3000 |
4000 |
|
室體注塑產品口尺寸規格 Dimension |
mm |
2500×800 |
3000×800 |
4000×400 |
|
深度清理產品工件直徑 Length |
mm |
3000-12000 |
2400-12000 |
4500-18000 |
|
輥道運送強度 Speed(魔宗變頻調速) |
m/min |
0.5-4.5 |
0.5-4 |
2月8日 |
|
進行清理不銹鋼板材厚度 Thickness |
mm |
3-60 |
3-110 |
4.5-100 |
|
加工處理鋁型材規格 Specifications |
|
60×8-300×1000 |
60×8-300×1000 |
60×8-300×1000 |
|
拋丸量 Shot peening quantity |
kg/min |
6×250 |
6×360 |
8×360 |
|
最先倒入量 First input volume |
kg |
4500 |
8000 |
11000 |
|
滾刷(括板)調準橫向 Width |
mm |
600 |
850 |
900 |
|
室內通風量 Air volume |
m3/h |
27758 |
28050 |
38000 |
|
外貌尺寸大小 Shape dimension |
mm |
31200×8070×7758 |
44042×6385×11117 |
45000×7830×11400 |
|
地表下類長度 Depth under the ground |
mm |
2353 |
2800 |
4317 |
|
總工率(含有收塵)Total power |
kw |
224.55 |
204.5 |
293.6 |
|
機設備總重 Total weight |
t |
53.2 |
71.8 |
75 |